CallTextMessage

Check Engine Light & Diagnostics in Aberdeen, WA

A check engine light can mean a loose gas cap or a failing catalytic converter. We find out which, explain it in plain terms, and give you a price before any repair starts.

What we do

  • Check engine light diagnosis
  • Live data, scan tool and scope testing
  • Misfires, rough idle and stalling
  • Sensors: oxygen, mass airflow, knock, crank and cam
  • Evap and vacuum leaks: found with a smoke machine
  • Dash warning lights: ABS, airbag (SRS), battery and temperature

Signs it’s time

  • Check engine light on, or flashing
  • Rough idle, stalling or hesitation
  • Worse fuel mileage than usual
  • Engine feels down on power
  • Smell of fuel or rotten eggs
Scan tool showing a cylinder power balance test on a Ford V8
Power balance test, Ford V8

A code is where we start

The computer stores a code when something falls outside its limits. The code tells us which system to look at. Finding the part that failed takes testing.

What the code means

A misfire code says the engine missed, not why. The cause could be a spark plug, a coil, an injector, a vacuum leak or low compression. Replace the wrong one and the light comes back.

How we test

We read live data and run tests like the power balance test in the photo, which shows how much each cylinder is contributing. A scope shows us sensor and wiring signals, and a smoke machine finds vacuum and evap leaks. Then we check the suspect part before we replace it.

Damp air and wiring

In a climate this wet, corroded connectors and grounds set off plenty of warning lights. We check the wiring before blaming the sensor.

How pricing works

A one-hour diagnostic is $162, tax included. It pays for the time it takes to test the car and find the cause, so it’s separate from the repair. Once we know what’s wrong, we quote the repair before any work starts. Every repair carries the 24-month / 24,000-mile nationwide warranty through NAPA AutoCare.

What customers say

  • I took my dad’s truck in to get the “knock sensor” replaced because the engine light came on and that was the code it gave us… She advised me that the only thing that would happen to the truck if they changed out the knock sensor is possibly turn off the check engine light… Now I don’t know of ANY other auto repair shop that would be that honest and up front with the customer.

    Wes Johnson II, Google

  • Diagnosed and corrected issues with our 56 Chev. Great to work with.

    Joyce Hoerling, Google

Check Engine Light & Diagnostics questions

Is it safe to drive with the check engine light on?

If the light is on and steady, the car is usually fine to drive while you book a visit. If it’s flashing, the engine is misfiring badly enough to overheat the catalytic converter. Ease off, get off the road and call us.

The parts store already read my code. Why do I need a diagnosis?

The code points to a system, not a part. A diagnosis finds what actually failed, so you pay for one repair instead of a string of parts that don’t fix it.

Will the light go off by itself?

Sometimes. After a loose gas cap is tightened, the light can go off on its own after a few days of driving. If it stays on or comes back, the problem is still there.

Do you work on older cars?

Yes. We diagnose older vehicles too, not just late-model cars with a code to read.